Prof. Dr. S. L. GHODAKE
Research:-
|
Year.
|
Organization.
|
Project Title.
|
Amount Received (Rs.)
|
|
2000-2002
|
Textile & Engineering Institute, Ichalkaranji.
|
Biomass Gasifier Engine Test Set up
|
30,000/-
|
|
2005-2006
|
Textile & Engineering Institute, Ichalkaranji.
|
Exhaust Gas Colorimeter for
High speed diesel Engine.
|
15,000/-
|
|
2006-2007
|
M/s. Balaji Bakers
Ichalkaranji
|
Conversion of Diesel fired furnace into Bio-diesel furnace
|
1,00,000/-
|
|
2005-2006
|
M/s Patil Automobiles
|
Testing & Certification of retrofitted Tractor (50 H.P.)
|
1,15,000/-
|
|
2009-2011
|
Kulkarni Power Tools Shrol
|
Modification And Calibration of Blower Test Rigs
|
15,00,000/-
|
Publications:-
|
Sr. No.
|
Title of the Paper
|
Name of the Conference
|
Duration
|
|
1
|
An Alternative Fuel for Partial Replacement of Diesel
|
National Conference on Advances in Mechanical Engineering Sciences
|
24th to 25th Sept.2004 at Shri Siddhartha Inst. Of Technology, Tumkur
|
|
2
|
Bagasse based Cogeneration in Sugar Industry – A case study
|
National Conference on Globally Competitive Eco- friendly Technologies in Mech. & Mechatronics Engineering
|
15th and 16th April 2005 at Kongu Engg. College Erode
|
|
3
|
Biomass Gasification- An Alternative Fuel
|
National Conference on Recent Developments in Mechanical Engineering
|
23rd and 24th December 2005 at COE Pandharpur
|
|
4
|
Bio- Diesel Fuel for Automotives
|
National Conference on Bio-Fuels for I.C. Engines perspectives & prospects
|
23rd to 25th March 2006 at NIT Surthkal
|
|
5
|
Slow Speed Diesel Engine Performance analysis using Bio-diesel Fuel
|
1st International conference on ‘ New Frontiers in bio-fuels’
|
18-19th January 2010. at
Delhi Technological University, New Delhi.
|
Asst.Prof. S. P. JADHAV
Publications:-
Paper Published in Journals (National/ International)
Paper Presented in Conferences (National/ International)
Research:-
Asst.Prof. D.G. BHOSALE
Publications:-
Paper Published in Journals (National/ International)
1.Prof. Digvijay G. Bhosale; “ Investigation of bending and contact stresses of helical gear pair using finite element method and validated by ISO 6336”; International Journal of Engineering Research and Technology (IJERT) ISSN:2278-0181, Volume 5, Issue 7, July 2016.
2.Mr. Yogesh A. Ingale, Prof. Digvijay G. Bhosale; “ Comparative study of Steel, Nylon 66,DELRIN helical gear used in steering system”; International Journal of Research in Engineering and Technology (IJRET) ISSN:2319-1163, June 2016.
Paper Presented in Conferences (National/ International)
1.Prof. Digvijay G. Bhosale, Prof. S. V. Diwan; “Finite Element Analysis of Helical Gear Pair” in the national conference on “Emerging Trends in Mechanical Engineering”.
2.Prof. Digvijay G. Bhosale; “Recent practices in IC Engines using Hydrogen as energy source” in the national conference on “Recent Practices in Conventional and Non-Conventional Energy Resources.”
Research:-
1.Design and Manufacturing of Multi lug nut tightner and remover.”
2.Optimization of Helical Gear Pair For Cost Reduction Through Finite Element Methods
3.Analysis of An Air Intake System of A Heavy Commercial Vehicle & Optimization For Reducing Leakages In The System
4Design and Performance Analysis of Nylon-66 Helical Rack and Pinion for Steering Gear Box.”
Asst.Prof. A. P. BHOSALE
Publications:-
Paper Published in Journals (National/ International)
1.“Experimental Investigation on Engine Performance And Emissions of A Four Cylinder Diesel Engine Using Hot And Cooled Exhaust Gas Recirculation” International Journal of Engineering Research and Technology.
2.“Review of Electrolysis Technologies” , International Journal of Hydrogen Energy, Elsevier publication (In Review)
Research:-
1.“Design, development and Optimization on Exhaust gas recirculation (EGR) cooler for 2.6 lt. diesel engine.” , sponsored by Force Motors Ltd., Akurdi Pune.
2.“Minimum fluidization velocities for mixtures of biomass and sands” sponsored by Genuine engineering, MIDC Shiroli, Kolhapur.
3.“Experimental Analysis of effect of water injection on emission and performance of petrol engine”
4.“Design and Development of transmission system for a Go-Kart”
Asst.Prof. M. M. BEPARI
Publications:-
Paper Published in Journals (National/ International)
1.SPICON-2012 – “Lean implementation in switchboard factory”.
2.UOWD – Dubai – 2012 – “The lean ahead for – Continuous improvement”.
3.BIAKM – 2015 – “Selection of third party logistic (3PL) service provider by using a MCDM approach for Indian cement manufacturing company.”
Research:-
1.Undergraduate Level:- “Design and manufacturing of Suitcase car” (B.E. Class, Self sponsored project)
2.Optimization of braking system for Go-Kart.
Asst.Prof. S. K. PISAL
Publications:-
Paper Published in Journals (National/ International)
Paper Presented in Conferences (National/ International)
Research:-
Asst.PRof. D. S. VIRKAR
Publications:-
Paper Published in Journals (National/ International)
1.Parametric study & Experimental Evaluation of Vehicle Tire performance, international journal of Mechanical Engg. & Robotics Research, Vol.2, No.2 April 2013.
2.Review on tire performance parameters & its testing setup, international journal of Engg. & science Research, vol.3, Jan 2012.
Research:-
1.Analysis of effect of the tire inflation pressure, inflation fluids, load and speed on tire performance
2.Characterization of biodiesel on engine performance
3.Engine powered bicycle
Asst.Prof. M. A. PATIL
Publications:-
Paper Published in Journals (National/ International)
Paper Published on “FEA of Tie Rod of Steering System of Car” in International Journal of Application & Innovation in Engineering & Management with Impact Factor 2.3 in July 2014
Paper Presented in Conferences (National/ International)
Paper Presented in National conference on Recent Trends in Interdisciplinary Research in Material science in December 2014
Research:-
Undergraduate Level: - “COMPARISON BETWEEN STANDARD AND ACTUAL PARAMETRS OF WELDING AND WELDING QUALITY IMPROVEMENT.” (B.E. SPONCERED PROJECT) FLEETGUARD PVT LTD, PUNE
Post Graduate Level:- “FEA BASED ANALYSIS OF TIE ROD OF AUTOMOBILE WITH EXPERIMENTAL AND THEROTICAL ANALYSIS ”
Projects Guided:
A project on “Electric Folding Scooter” in 2015-16.
A project on “Zero leg clutch” in 2014-15.
Asst.Prof. Y. A. INGALE
Publications:-
Paper Published in Journals (National/ International)
“Comparative Study of Steel, Nylon 66 and DELRIN material Helical gears steering gearbox” in International journal of Research in Engineering & Technology, Volume 5, Issue 6, June 2016.
Research:-
Ongoing project -
PG - “Development of Plastic Helical gear box for steering system using Finite Element Analysis”
Completed projects -
UG - “Automatic Clay Content Tester”
Asst.Prof. S. S. KUMBHAR
Publications:-
Paper Published in Journals (National/ International)
Paper Presented in Conferences (National/ International)
Research:-
Asst.Prof. R. A. THORAT
Publications:-
Paper Published in Journals (National/ International)
International Journal of Scientific and Research Publications.
Topic - Performance Evaluation of Centrifugal Type Boiler Feed Pump by Varying Blade Number.
Paper Presented in Conferences (National/ International)
Topic - Optimization of Blade Number for Centrifugal Type Boiler Feed Pump presented in National Symposium on Engineering & Technology
Research:-
UG – DESIGN A SYSTEM FOR PUMPING HIGHLY VISCOUS FLUID
PG – DESIGN & ANALYSIS OF BOILER FEED PUMP FOR HIGH TEMPERATURE & HIGH PRESSURE.